At present we have a state of the art machine, made
in Italy, which allows us to offer our customers the
material they need and with the measures that most
suites their manufacturing requirements.
This cutting line simultaneously carries
out the following operations:
1) Straightening
2) Polyethylene coating
3) Longitudinal cutting
4) Transversal cutting
Thus avoiding excesive handling of the
material, bearing in mind that the stainless steel is
a very delicate material and this process is used keeping
the original finish.
Technical Characteristics
Digital Encoder of 1.000 pulses which allows
to carry out exact transversal cuttings, i.e.: 333,5mm
Digital knives positioner and longitudinal cutting slitter which
allow to carry out 5 longitudinal cuts along the width of the coil
to be used.
We can process thicknesses from 0,40mm to 1,6mm.
The automatic stacking device prevents damages to the pieces once
they are cut because they do not have to be piled up one on top
of the other.
The electrostatic power generator that sticks the paper momentarily
to the sheet in order to get a better storage, above all as regards
small pieces.
Advantages
Giving our customers different measures
apart from the standard ones.
Reducing scrap.
Eliminating the process of cutting at the mill.
Shorten the period of time for production.
Preventing damages that may be caused during the process by means
of the polyethylene protection.
|
